Stretch Wrap Buying Guide: Gauge, Hand vs Machine, and Roll Sizes
Share
Most stretch wrap waste comes from three mistakes: film too thick for the load, the wrong film for the wrapper, and nobody counting pallets per roll.
Hand wrap vs machine wrap
Hand wrap comes on 12 to 20 in (30 to 50 cm) rolls, usually 1,000 to 2,000 ft (305 to 610 m) long, with a core you hold or put on a dispenser. It makes sense under about 15 to 20 pallets a day, or when loads are odd shapes.
Machine wrap comes on 20 in (50 cm) rolls and runs 5,000 to 9,000 ft (1,500 to 2,700 m). A wrapper with a powered pre-stretch carriage stretches it 200% to 300% before it touches the load. That's where the savings come from. One foot of roll turns into 3 to 4 feet on the pallet.
If you're wrapping dozens of pallets a day by hand, it's worth pricing out a semi-automatic turntable. Compare its cost against your crew's wrapping time and the film the pre-stretch would save.
Gauge and micron
Film thickness is sold in gauge (US) or micron (metric).
100 gauge = 1 mil = 25.4 micron. The common stretch film gauges:
| Gauge | Mil | Micron |
|---|---|---|
| 47 ga | 0.47 mil | 11.9 micron |
| 53 ga | 0.53 mil | 13.5 micron |
| 60 ga | 0.60 mil | 15.2 micron |
| 63 ga | 0.63 mil | 16.0 micron |
| 70 ga | 0.70 mil | 17.8 micron |
| 80 ga | 0.80 mil | 20.3 micron |
| 90 ga | 0.90 mil | 22.9 micron |
| 100 ga | 1.00 mil | 25.4 micron |
| 120 ga | 1.20 mil | 30.5 micron |
Some hand films are labeled only in micron. High-performance (hi-perf) hand films run thin: our 12 micron hi-perf hand film is about 47 gauge, and the 8.5 micron pre-stretch film is about 33 gauge. Compare them on pallets per roll, not on thickness. For any other number, use the micron to mil converter.
Thicker isn't automatically stronger. A good 63 gauge cast film can outhold a cheap 80 gauge. Match the film to the load:
- Light, even boxes (under 1,000 lb / 450 kg): 47 to 63 gauge, or a pre-stretch film
- Average mixed cases (1,000 to 2,000 lb / 450 to 900 kg): 70 to 80 gauge
- Heavy, sharp or uneven loads (over 2,000 lb / 900 kg): 90 to 120 gauge, or a blown film
If your current film tears at the corners, a stronger film or corner boards will usually fix it. A thicker film often won't.
Cast vs blown
Cast film is clearer, quieter to unwind and costs less, and it's right for most uniform cases. Blown film resists punctures and holds better at the same gauge, so it's the pick for lumber, cans, steel parts and anything with sharp corners. The full comparison is in Cast vs. Blown Stretch Film.
Pre-stretch film
Pre-stretch film is stretched at the factory, so it goes on thin (often 6 to 12 micron) and holds without hard pulling. Folded edges resist tearing. Lighter rolls, less tired crews.
Use it for light-to-medium, square loads. Skip it for heavy or sharp loads. For vented and perforated films (produce, warm product) see Stretch Film Types Explained.
Roll length and width
- 18 in x 1,500 ft is the standard hand roll. At 80 gauge it weighs about 9 lb.
- 1,000 ft rolls are usually the thick gauges (100 to 120). Same weight, fewer feet.
- 12 to 15 in rolls are easier on smaller hands and for short loads.
- 20 in x 5,000 to 6,000 ft is the standard machine roll. Check your wrapper's carriage width and core before you switch brands.
Pallet math: how many pallets does a roll wrap?
The formula:
Feet per pallet = (pallet perimeter in feet) x (number of wraps) ÷ (stretch factor)
Pallets per roll = roll length ÷ feet per pallet
Worked example: hand wrap
- Pallet: 48 x 40 in, load 60 in tall
- Perimeter: 2 x (48 + 40) = 176 in = 14.7 ft
- 18 in film with 50% overlap covers 9 in of height per wrap. 60 in ÷ 9 in = about 7 wraps up the load
- Add 3 wraps at the bottom to lock the load to the pallet and 2 at the top: 12 wraps total
- Film on the load: 14.7 ft x 12 = 176 ft
- Hand wrap gets maybe 50% stretch on a good day (stretch factor 1.5): 176 ÷ 1.5 = about 117 ft off the roll
- 1,500 ft roll ÷ 117 ft = about 12 pallets per roll
Same pallet on a machine
- 20 in film, about 12 wraps, 200% pre-stretch (stretch factor 3)
- 176 ft ÷ 3 = about 59 ft off the roll
- 6,000 ft roll ÷ 59 ft = about 100 pallets per roll
Your numbers will vary. Track a week of real usage and divide. For more scenarios see How Much Stretch Wrap Do You Actually Need?
Cost per pallet
Take the price per roll and divide by pallets per roll. That number, not the roll price, is what you're really paying. A thinner film that still holds the load can cost less per pallet even when the rolls look similar, so compare films on cost per pallet. Multiply the difference by the pallets you ship in a year to see what the switch is worth.
Quick picks
Browse: Hand Film · Machine Film · Pre-Stretch
- Everyday hand wrap: WrapTite Hand Wrap 18" x 1500' x 80 ga. Sold by the case of 4 rolls.
- Light loads: WrapTite Perf Hand Wrap Down Gauge 18" x 1500' x 53 ga. Sold by the case of 4 rolls.
- Pre-stretch for hand crews: 17" x 1,476' Pre-Stretch, 8.5 micron, folded edges. Sold by the case of 4 rolls.
- Machine wrap, outdoor storage: UVI Cast Machine Stretch Film 20" x 6,000', 80 ga. Sold by the pallet of 40 rolls.
- Cutter: Heavy Duty Stretch Wrap Cutter.
Stretch wrap by gauge: what it costs
| Product | Use it for | Price |
|---|---|---|
| WrapTite 18 in. x 1,500 ft, 53 ga perforated down-gauge hand wrap, case of 4 | Light, even boxed loads | $49.44/case |
| WrapTite 18 in. x 1,500 ft, 70 ga cast hand wrap, case of 4 | Average mixed cases | $58.08/case |
| WrapTite 18 in. x 1,500 ft, 80 ga cast hand wrap, case of 4 | Everyday default | $64.96/case |
| WrapTite 18 in. x 1,500 ft, 90 ga blown hand wrap, case of 4 | Sharp or uneven loads | $77.24/case |
| WrapTite 18 in. x 1,000 ft, 120 ga cast hand wrap, case of 4 | Heavy loads | $65.92/case |
| UVI cast machine film 20 in. x 6,000 ft, 80 ga, pallet of 40 | Machine wrapping, outdoor storage | $3,234.80/pallet |
Prices as listed on supplytie.com on Oct 30, 2026, before shipping and tax; they can change.
Supply Tie, founded in 2023, carries 100,000+ SKUs and ships to the lower 48 states. Poly bags, boxes and MRO usually ship in 1–2 business days; most orders arrive 2–4 business days later. Other items vary by vendor. Approved business accounts can order on Net 30, with bulk and pallet pricing on volume orders. Questions: support@supplytie.com, or get a free bulk price check.
FAQ
What gauge stretch wrap do I need?
For most mixed-case pallets under 2,000 lb (900 kg), 70 to 80 gauge cast film works. Go to 47 to 63 gauge or pre-stretch for light, even boxes, and 90 to 120 gauge or blown film for heavy or sharp loads.
How many pallets can one roll of stretch wrap cover?
A standard 18 in x 1,500 ft hand roll covers about 10 to 15 pallets of a 48 x 40 x 60 in load. A 20 in x 6,000 ft machine roll at 200% pre-stretch covers about 80 to 100 pallets. Multiply perimeter by wraps, divide by stretch, then divide roll length by that.
What is the difference between gauge and micron?
They both measure thickness. 100 gauge equals 1 mil, which is about 25 micron. 80 gauge is about 20 micron.
Is cast or blown stretch film better?
Cast is clearer, quieter and cheaper, and right for most uniform loads. Blown resists punctures and holds better at the same thickness, so use it for sharp, heavy or uneven loads.
Can I use hand wrap in a stretch wrap machine?
No. Hand rolls are too short and the cores don't fit a wrapper carriage. Machine film is made to be pre-stretched 200% or more by the machine.
What is pre-stretch film?
Film stretched at the factory so it goes on thin and holds without heavy pulling. It cuts film weight and operator fatigue on light-to-medium square loads.
Shop: stretch wrap · stretch film sizes and gauges chart · stretch wrap cost calculator