Stretch Film Sizes and Gauges: A Case-and-Pallet Buying Guide
Share
The short answer
Choose stretch film by application first, then roll width, thickness and tested load containment. Hand film, machine film and narrow banding film are not interchangeable. An 80-gauge roll is a useful comparison point, not a guarantee that a particular pallet will arrive safely.
Read a roll specification
An 18-inch x 1,500-foot x 80-gauge description gives width, nominal length and nominal thickness. In conventional plastic-film thickness units, 100 gauge equals 1 mil, or 0.001 inch. Therefore 80 gauge is 0.8 mil, about 20.3 microns; 60 gauge is 0.6 mil, about 15.2 microns; and 120 gauge is 1.2 mil, about 30.5 microns. Check whether a listing states actual thickness or an equivalent-performance claim. Equivalent gauge is not a thickness measurement.
Match the width to the work
Narrow banding film, often about 2–6 inches wide, bundles items or keeps cartons together. It is not automatically a substitute for full-width pallet wrap.
Hand film in 12-, 15- or 18-inch widths offers different balances of coverage and handling effort. Wider rolls cover more height per pass but can be harder to control. Consider the roll's weight, dispenser and operator reach as well as its width.
Machine film must match the wrapper's permitted width, core, roll diameter, roll weight and pre-stretch system. Do not order a pallet based only on a familiar width. Compare the wrapper manual with the film's technical sheet.
Use gauge as a starting point, not a load rating
For conventional film, roughly 60–70 gauge may be a trial candidate for light, uniform boxed loads; 80 gauge is a common starting point for everyday boxed pallets; heavier or irregular loads may need thicker film, protective edges or a different wrapping pattern. These are trial categories, not safe load-weight limits.
High-performance thinner films can perform differently from conventional films. Pre-stretched film has already been stretched during manufacture; do not assume it should be tensioned like ordinary hand film. A thinner product is only a saving if it maintains containment on your actual load.
Test before committing to a pallet
Use representative loads, including the least stable load, not just the neatest pallet. Record film type, width, thickness, wraps, overlap, machine settings and film used. Check sharp corners, crushed cartons, shifting and tears after normal handling. Have the responsible packaging or safety team approve the result. Film is not a replacement for required cargo securement.
Compare cost per successful load
A cheaper roll can contain less usable film or need more wraps. Compare delivered cost, net film weight or footage, rolls per case, cases per pallet and measured consumption. For example, a hypothetical $60 case of four rolls costs $15 per roll. If each roll reliably completes 12 loads, film costs $1.25 per load before labor and damage. This is an illustration, not a Supply Tie price or a promised yield.
Bulk-order checklist
Specify application, width, actual thickness, length, core, roll weight, film construction, color, rolls per case, cases per pallet and monthly usage. Include the delivery ZIP and receiving constraints when requesting bulk or pallet pricing. Confirm the freight amount and delivery arrangements before approving an order.
Browse film categories
Frequently asked questions
Is stretch film the same as shrink film?
No. Stretch film holds by stretching and clinging. Shrink film is designed to contract with suitable heat equipment.
Does thicker always mean better?
No. Resin formulation, puncture resistance, stretch behavior and wrapping pattern all matter. Compare actual results and cost per stable load.
How many rolls are on a pallet?
It varies by product. Confirm rolls per case and cases per pallet rather than applying one catalog-wide number.
Can we buy on terms?
Supply Tie offers Net 30 for approved business accounts, tax-exempt buying and bulk/pallet pricing. Supply Tie ships to the lower 48 states. Confirm item-specific lead times and freight before ordering.