Poly Bag Sizing: How to Specify Cases and Pallets Without Guesswork

The short answer

Measure the actual packed item, allow for its depth and closure, and test a sample before ordering cases or pallets. Bag width is normally a layflat measurement, not the width of an opened bag around a three-dimensional object. Thickness is a separate choice from size.

Start with the application

Flat open-top bags suit many parts and simple assemblies. Reclosable bags support repeated access. Gusseted bags expand to accommodate depth. Tubing can accommodate varying lengths when cut and sealed with suitable equipment. Check the specific product's intended use rather than assuming every clear bag is food-contact suitable, anti-static or compatible with a particular chemical.

Measure the item as shipped

Record its maximum width, length and depth, including protrusions and protective padding. Decide how the item will enter the bag and which dimension becomes the opening. Include the space needed for insertion, a heat seal, twist tie, fold or zip closure. A zipper can reduce usable internal length; confirm whether the listed length is measured below the zipper.

For a flat bag around a rectangular item, a preliminary estimate is layflat width at least item width plus item depth, with extra clearance. A preliminary length estimate is item length plus item depth plus closure allowance. These are starting estimates, not a fit guarantee: orientation, seams, stiffness and sharp corners can change the result.

Example: a rectangular part measuring 6 inches wide, 8 inches long and 2 inches deep starts around 8 inches of layflat width before clearance, and around 10 inches of length before closure allowance. Do not order an 8 x 10 bag from that calculation alone. Choose clearance appropriate to the item and verify the actual usable dimensions with a sample.

Understand gusset notation

Gusseted bags are commonly described by width x gusset x length, but notation varies. Confirm that the gusset number means the fully expanded depth rather than the width of one folded section. Ask for a dimensional drawing when the convention is unclear. Measure liners and covers against the outside dimensions of the container or load they must enclose.

Choose thickness independently

One mil is 0.001 inch, or 25.4 microns. Two mil is 0.002 inch; four mil is 0.004 inch. Mil does not mean millimeter. Light, smooth parts may use thinner bags; heavy, abrasive or pointed parts may need thicker film, protective caps or a different packaging method. Thickness alone does not establish a safe weight limit or puncture rating.

For sensitive applications, verify the product's documentation: food-contact suitability, anti-static properties, cleanliness, temperature range and material compatibility are not interchangeable claims. A plain polyethylene bag is not automatically a moisture-barrier or corrosion-inhibiting package.

Normalize the price before buying in bulk

Check bags per case for every size. Large bags may have fewer pieces per case than small bags. Compare delivered cost per 1,000 usable bags, not just carton price. A hypothetical $48 case of 1,000 bags costs $48 per 1,000. A $30 case of 500 costs $60 per 1,000. Freight, reject rates and packing labor can change the better choice.

Bulk-order specification

Include bag style, usable inside dimensions, thickness, material, closure, printing or write-on area, documentation requirements, bags per case and expected monthly usage. Request bulk or pallet pricing only after confirming fit. Keep a labeled approved sample so future orders can be checked against the same dimensions and material.

Browse live collections

Frequently asked questions

Will a 6 x 8 bag fit a 6 x 8 part?

Not necessarily. A three-dimensional part needs space for depth and insertion; seams and the closure also affect usable space.

Is 4 mil twice as strong as 2 mil?

It is twice the nominal thickness, not necessarily twice the puncture resistance or safe carrying capacity. Material and application matter.

Can one size cover every item?

Sometimes, but excessive bag size wastes material and packing time. Trial a small set of standardized sizes before making a large purchase.

Where does Supply Tie ship, and how fast?

Supply Tie ships to the lower 48 states. Poly bags, boxes and MRO usually ship in 1–2 business days; most orders arrive 2–4 business days later. Other items vary by vendor.

Are business purchasing options available?

Net 30 for approved business accounts, tax-exempt buying and bulk/pallet pricing are available. Confirm the order's item quantities and freight before approval.

Back to blog