Electrical Conduit Fittings: EMT, Rigid, Flex and Liquid-Tight

In short

Supply Tie sells electrical conduit fittings by the pack: 209 fittings available to order, from $0.15 to $60.27 per fitting as of Nov 19, 2026. The lowest-priced pack is a single (3/4 in. Plastic Insulating Bushing) for $0.30; packs run from 1 to 100 fittings, and 26 of these have larger multi-pack options at a lower price per fitting.

Electrical conduit fittings connect conduit and cable to boxes and to each other. This page lists Sigma ProConnex connectors, couplings, elbows, nipples, bushings, conduit bodies, service entrance heads and ground clamps by trade size.

Sizes, packs and price per fitting

Size (trade size) Fitting, material and use Pack and price Per fitting Item / part #
1-1/4 in. 1-1/2 to D Zinc-Plated Steel Reducing Washer Pack of 2: $0.86 $0.43 49310
1-1/2 in. 2 to D Zinc-Plated Steel Reducing Washer Pack of 2: $1.11 $0.56 49315
1-1/4 -2 in. Copper Alloy Ground Clamp Each: $6.63 $6.63 41311
1/2 - 1 in. Copper Alloy Ground Clamp for Armored Wire Each: $4.06 $4.06 41409
1/2 - 1 in. Copper Alloy Ground Clamp for Direct Burial Each: $4.25 $4.25 41310
1-1/4 in. D Die-Cast Aluminum Conduit Body For Rigid Each: $16.00 $16.00 02-55644LB
1-1/2 in. D Die-Cast Aluminum Conduit Body For Rigid/IMC Each: $18.81 $18.81 02-55645LB
1-1/4 in. D Die-Cast Aluminum Conduit Body For Rigid/IMC Each: $44.47 $44.47 02-51128
1-1/4 in. D Die-Cast Aluminum Service Entrance Elbow Each: $10.31 $10.31 02-51028
1-1/2 in. D Die-Cast Aluminum Service Entrance Elbow Each: $21.20 $21.20 02-51029
0 in. D Die-Cast Aluminum Service Entrance Head For NM/SE Each: $8.07 $8.07 02-51200
1-1/4 in. D Die-Cast Aluminum Service Entrance Head For NM/SE 1 Each: $5.98 $5.98 02-51254
1-1/2 in. D Die-Cast Aluminum Service Entrance Head For NM/SE 1 Each: $9.47 $9.47 02-51255
2-1/2 in. D Die-Cast Aluminum Service Entrance Head For Rigid Each: $40.69 $40.69 02-51257
1/2 - 3/8 in. D Die-Cast Zinc Combination Coupling For EMT/NM 1 Single: $1.08
Pack of 10: $10.00
$1.08
$1.00
49279
49279
1-1/4 in. D Die-Cast Zinc Compression Connector For EMT Each: $3.04 $3.04 02-55253
1-1/2 in. D Die-Cast Zinc Compression Coupling For EMT Each: $3.70 $3.70 02-55264
1-1/4 in. D Die-Cast Zinc Compression Coupling For EMT Each: $3.20 $3.20 02-55263
1-1/4 in. D Die-Cast Zinc Conduit Nipple For Rigid/IMC Each: $2.17 $2.17 49205
1-1/2 in. D Die-Cast Zinc Conduit Nipple For Rigid/IMC Each: $3.06 $3.06 49206
1-1/2 in. D Die-Cast Zinc Offset Nipple For Rigid/IMC Each: $5.16 $5.16 02-51524
1-1/4 in. D Die-Cast Zinc Set Screw Connector For EMT Each: $1.63 $1.63 02-55233
1-1/2 in. D Die-Cast Zinc Set Screw Connector For EMT Each: $2.24 $2.24 02-55234
1-1/4 in. D Die-Cast Zinc Set Screw Coupling For EMT Each: $1.70 $1.70 02-55243
1-1/2 in. D Die-Cast Zinc Set Screw Coupling For EMT Each: $1.96 $1.96 02-55244
2-1/4 in. D Porcelain/Steel Wire Holder For NM/SE Each: $7.11 $7.11 02-56033
0 in. D Porcelain/Steel Wire Holder For NM/SE Each: $11.45 $11.45 02-56037
1-11/16 in. D Porcelain/Steel Wire Holder For NM/SE Each: $4.26 $4.26 02-56030
2-1/2 in. D Zinc-Plated Steel Electrical Conduit Locknut Each: $1.92 $1.92 49107
0 in. Die-Cast Zinc Intersystem Bond Bridge Each: $9.35 $9.35 42400
1-1/2 in. NM/SE Clamp Clamp Connector D Each: $2.50 $2.50 44675
1-1/4 in. NM/SE Clamp Clamp Connector D Single: $1.64
Pack of 10: $15.20
$1.64
$1.52
44664
44664
0 in. Plastic Anti-Short Bushing Single: $1.26
Pack of 10: $11.70
$1.26
$1.17
02-55035L
02-55035L
2-1/2 in. Plastic Insulating Bushing Each: $1.07 $1.07 49327
1-1/4 in. Plastic Insulating Bushing Single: $0.40
Pack of 50: $18.00
$0.40
$0.36
49324
49324
1-1/2 in. Plastic Insulating Bushing Single: $0.44
Pack of 25: $10.00
$0.44
$0.40
49325
49325
1-1/4 in. Service Entrance Cable Connector D Each: $5.63 $5.63 02-55770
3/4-1 in. Two-Piece Clamp Connector D Each: $0.83 $0.83 49654
4-1/0 in. Wedge Clamp Connector D Each: $15.93 $15.93 51062
1-1/2 in. Zinc Insulated Grounding Bushing Each: $6.44 $6.44 49385
1-1/4 in. Zinc Insulated Grounding Bushing Each: $5.49 $5.49 44384
1-1/4 in. Zinc-Plated Steel 90 Degree Elbow For EMT Each: $7.91 $7.91 02-55544PE
1-1/2 in. Zinc-Plated Steel 90 Degree Elbow For EMT Each: $9.49 $9.49 02-55545PE
1-1/4 in. Zinc-Plated Steel 90 Degree Elbow For Rigid/IMC 1 p Each: $15.37 $15.37 02-55534PE
1-1/2 in. Zinc-Plated Steel 90 Degree Elbow For Rigid/IMC 1 p Each: $18.99 $18.99 02-55535PE
1-1/2 in. Zinc-Plated Steel Conduit Coupling For Rigid/IMC 1 Each: $4.46 $4.46 02-55084
1-1/4 in. Zinc-Plated Steel Conduit Coupling For Rigid/IMC 1 Each: $3.57 $3.57 02-55083
1-1/4 in. Zinc-Plated Steel Rain-Tight Compression Connector Each: $6.61 $6.61 02-54853
3/8 in. D Die-Cast Zinc Double Snap Lock Connector For AC, MC a Each: $2.23 $2.23 45505
3/8 in. D Die-Cast Zinc Duplex Connector For AC, MC Each: $1.18 $1.18 49630
3/8 in. D Die-Cast Zinc Flex Connector For AC and MC Pack of 100: $28.25 $0.28 C-550
3/8 in. D Die-Cast Zinc Flex Connector For AC, MC and FMC/RWFMC Pack of 25: $25.36 $1.01 C-570
3/8 in. D Die-Cast Zinc Screw-In Connector For FMC Pack of 50: $27.99 $0.56 49009
3/8 in. D Die-Cast Zinc Squeeze Connector For AC, MC or FMC/RWF Single: $0.65
Pack of 25: $15.00
$0.65
$0.60
49401
49401
3/8 in. D Steel Fixture Lockout For Accessories Pack of 100: $41.50 $0.41 49099
3/8 in. NM Cable Connector D Pack of 10: $2.89 $0.29 44840
3/8 in. Sigma Engineered Solutions Double Snap Lock D Die-Cast Zinc Duplex Connector For AC, MC Each: $2.64 $2.64 49635
3/8 in. Sigma Engineered Solutions Snap Lock D Die-Cast Zinc Duplex Connector For AC, MC Each: $1.89 $1.89 49631
3/8 in. Sigma Engineered Solutions Snap Lock D Die-Cast Zinc Flex Connector For AC and MC Pack of 25: $15.89 $0.64 C-560
3/8 in. Sigma Engineered Solutions Snap Lock D Die-Cast Zinc Saddle Connector For AC, MC and NM Each: $1.53 $1.53 49504
3/8 in. Two-Piece Clamp Connector D Each: $0.66 $0.66 49652
1/2 in. 1 to D Zinc-Plated Steel Reducing Washer For Rigid/IMC Pack of 2: $0.52 $0.26 49302
1/2 in. 3/4 x Zinc Reducing Bushing Single: $0.89
Pack of 25: $20.25
$0.89
$0.81
49001
49001
1/2 in. Copper Alloy Ground Clamp 1 pk — Model Each: $9.07 $9.07 51510
1/2 in. Copper Alloy Ground Clamp 1 pk — Model Each: $8.24 $8.24 51511
1/2 in. Copper Alloy Ground Clamp with Lay-In Lug Each: $7.40 $7.40 42309
1/2 in. Copper Alloy Ground Rod Clamp Each: $3.31 $3.31 49162
1/2 in. Copper Alloy Universal Ground Rod Clamp Each: $4.88 $4.88 49165
1/2 in. D Die-Cast Aluminum Conduit Body For Rigid Each: $5.99 $5.99 02-55641LB
1/2 in. D Die-Cast Aluminum Conduit Body For Rigid 1 pk — Model Each: $5.39 $5.39 02-55641C
1/2 in. D Die-Cast Aluminum Conduit Body For Rigid 1 pk — Model Each: $6.55 $6.55 02-55641T
1/2 in. D Die-Cast Aluminum Conduit Body For Rigid 1 pk — Model Each: $5.16 $5.16 02-55641LR
1/2 in. D Die-Cast Aluminum Conduit Body For Rigid 1 pk — Model Each: $5.16 $5.16 02-55641LL
1/2 in. D Die-Cast Aluminum Service Entrance Elbow For Rigid 1 Each: $3.84 $3.84 02-51025
1/2 in. D Die-Cast Zinc 90 Degree Compression Connector For EMT Single: $1.98
Pack of 10: $18.30
$1.98
$1.83
49057
49057
1/2 in. D Die-Cast Zinc 90 Degree Connector For Liquid Tight 1 Each: $3.91 $3.91 49470
1/2 in. D Die-Cast Zinc Combination Coupling For EMT/Flex Each: $1.66 $1.66 49280
1/2 in. D Die-Cast Zinc Compression Connector For EMT Pack of 5: $6.60 $1.32 49870
1/2 in. D Die-Cast Zinc Compression Connector For EMT TC-601 Pack of 50: $28.30 $0.57 TC-601
1/2 in. D Die-Cast Zinc Compression Coupling For EMT Pack of 10: $8.99 $0.90 49260
1/2 in. D Die-Cast Zinc Compression Coupling For EMT TC-611 Pack of 50: $38.56 $0.77 TC-611
1/2 in. D Die-Cast Zinc Conduit Nipple For Rigid/IMC Single: $0.51
Pack of 25: $11.75
$0.51
$0.47
49202
49202
1/2 in. D Die-Cast Zinc Corner Elbow For EMT Each: $4.54 $4.54 49591
1/2 in. D Die-Cast Zinc Offset Compression Connector For EMT 1 Each: $2.13 $2.13 49706
1/2 in. D Die-Cast Zinc Offset Nipple For Rigid/IMC Single: $1.52
Pack of 10: $14.00
$1.52
$1.40
49020
49020
1/2 in. D Die-Cast Zinc Pull Elbow For Rigid/IMC Each: $3.11 $3.11 49681
1/2 in. D Die-Cast Zinc Rain-Tight Compression Connector For EM Single: $0.97
Pack of 25: $22.75
$0.97
$0.91
49850
49850
1/2 in. D Die-Cast Zinc Rain-Tight Compression Coupling For EMT Each: $1.14 $1.14 49860
1/2 in. D Die-Cast Zinc Screw-In Connector For FMC Pack of 50: $22.50 $0.45 56010
1/2 in. D Die-Cast Zinc Set Screw Connector For EMT TC-501 Pack of 50: $17.80 $0.36 TC-501
1/2 in. D Die-Cast Zinc Set Screw Connector For FMC/RWFMC Single: $1.08
Pack of 10: $10.00
$1.08
$1.00
49090
49090
1/2 in. D Die-Cast Zinc Set Screw Coupling For EMT TC-511 Pack of 50: $21.77 $0.44 TC-511
1/2 in. D Die-Cast Zinc Squeeze Connector For AC, MC and FMC Pack of 25: $27.88 $1.12 55804
1/2 in. D Die-Cast Zinc Straight Connector For Liquid Tight 1 p Each: $2.31 $2.31 49430
1/2 in. D Die-Cast Zinc Water-Tight Conduit Hub For Rigid/IMC 1 Each: $4.57 $4.57 49070
1/2 in. D Zinc-Plated Iron Straight Connector For Liquid Tight Each: $3.18 $3.18 45760
1/2 in. D Zinc-Plated Steel 90 Degree Elbow For EMT Each: $5.18 $5.18 02-55541PE
1/2 in. D Zinc-Plated Steel Conduit Coupling For Rigid/IMC Single: $1.81
Pack of 10: $16.80
$1.81
$1.68
02-55080
02-55080
1/2 in. D Zinc-Plated Steel Threaded Nipple For Rigid/IMC Single: $2.12
Pack of 10: $19.60
$2.12
$1.96
44360
44360
1/2 in. Galvanized Steel 90 Degree Elbow For Rigid/IMC Each: $5.77 $5.77 02-55531PE
1/2 in. NM Cable Connector D Pack of 6: $2.30 $0.38 44841
1/2 in. NM Cable Connector D Pack of 100: $14.99 $0.15 55740
1/2 in. NM/SE Clamp Connector D Pack of 100: $26.99 $0.27 C-500
1/2 in. Non-Metallic Cord Grip Connector D 49226M Each: $3.57 $3.57 49226M
1/2 in. Zinc Insulated Grounding Bushing 1 pk — Bushing Inside Diameter 0.54 Each: $5.69 $5.69 43381
1/2 in. Zinc Insulated Grounding Bushing 1 pk — Bushing Inside Diameter 1/2 Each: $4.29 $4.29 49381
1/2 in. Zinc-Plated Iron 90 Degree Connector For Liquid Tight Each: $5.00 $5.00 45763
1/2 in. Zinc-Plated Steel Compression Connector For Rigid/IMC Each: $3.87 $3.87 49050
1/2 in. Zinc-Plated Steel Compression Coupling For EMT Each: $2.33 $2.33 49040
1/2 in. Zinc-Plated Steel Compression Coupling For Rigid/IMC Each: $6.42 $6.42 49060
1/2 in. Zinc-Plated Steel Threaded Nipple For Rigid/IMC Each: $3.08 $3.08 54254
5/8 in. Copper Alloy Ground Rod Clamp Each: $2.29 $2.29 49163
3/4 in. 1 x Zinc Reducing Bushing Each: $1.63 $1.63 49003
3/4 in. D Die-Cast Aluminum Conduit Body For Rigid Each: $6.63 $6.63 02-55642C
3/4 in. D Die-Cast Aluminum Conduit Body For Rigid Each: $8.25 $8.25 02-55642T
3/4 in. D Die-Cast Aluminum Conduit Body For Rigid Each: $6.63 $6.63 02-55642LL
3/4 in. D Die-Cast Aluminum Conduit Body For Rigid Each: $6.99 $6.99 02-55642LB
3/4 in. D Die-Cast Aluminum Conduit Body For Rigid/IMC Each: $6.63 $6.63 02-55642LR
3/4 in. D Die-Cast Aluminum Service Entrance Elbow For Rigid 1 Each: $5.04 $5.04 02-51026
3/4 in. D Die-Cast Aluminum Service Entrance Head For NM/SE 1 p Each: $4.68 $4.68 02-51252
3/4 in. D Die-Cast Zinc 90 Degree Compression Connector For EMT Each: $2.71 $2.71 49058
3/4 in. D Die-Cast Zinc 90 Degree Connector For Liquid Tight 1 Each: $5.91 $5.91 49471
3/4 in. D Die-Cast Zinc 90 Degree Squeeze Connector For AC, MC Each: $2.26 $2.26 49806
3/4 in. D Die-Cast Zinc Compression Connector For EMT Pack of 3: $6.43 $2.14 49871
3/4 in. D Die-Cast Zinc Compression Connector For EMT Pack of 25: $31.99 $1.28 49251
3/4 in. D Die-Cast Zinc Compression Connector For EMT TC-602 Pack of 25: $30.40 $1.22 TC-602
3/4 in. D Die-Cast Zinc Compression Coupling For EMT Pack of 12: $12.00 $1.00 49261
3/4 in. D Die-Cast Zinc Conduit Nipple For Rigid/IMC Single: $0.79
Pack of 25: $18.25
$0.79
$0.73
49203
49203
3/4 in. D Die-Cast Zinc Corner Elbow For EMT Each: $5.76 $5.76 49592
3/4 in. D Die-Cast Zinc Offset Nipple For Rigid/IMC Single: $2.08
Pack of 10: $19.20
$2.08
$1.92
49021
49021
3/4 in. D Die-Cast Zinc Offset Set Screw Connector For EMT Each: $2.05 $2.05 49007
3/4 in. D Die-Cast Zinc Pull Elbow For EMT Each: $3.91 $3.91 49562
3/4 in. D Die-Cast Zinc Pull Elbow For Rigid/IMC Each: $4.11 $4.11 49682
3/4 in. D Die-Cast Zinc Rain-Tight Compression Connector For EM Single: $1.19
Pack of 10: $11.10
$1.19
$1.11
49851
49851
3/4 in. D Die-Cast Zinc Rain-Tight Compression Coupling For EMT Each: $1.40 $1.40 49861
3/4 in. D Die-Cast Zinc Screw-In Connector For FMC Single: $1.05
Pack of 25: $24.25
$1.05
$0.97
49011
49011
3/4 in. D Die-Cast Zinc Screw-In Connector For FMC Pack of 25: $21.00 $0.84 56011
3/4 in. D Die-Cast Zinc Set Screw Connector For EMT TC-502 Pack of 25: $12.17 $0.49 TC-502
3/4 in. D Die-Cast Zinc Set Screw Coupling For EMT TC-512 Pack of 25: $18.85 $0.75 TC-512
3/4 in. D Die-Cast Zinc Squeeze Connector For AC, MC or FMC/RWF Single: $1.24
Pack of 10: $11.50
$1.24
$1.15
49408
49408
3/4 in. D Die-Cast Zinc Straight Connector For Liquid Tight 1 p Each: $3.20 $3.20 49431
3/4 in. D Die-Cast Zinc Water-Tight Conduit Hub For Rigid/IMC 1 Each: $6.77 $6.77 44071
3/4 in. D Plastic 90 Degree Connector For Liquid Tight Each: $3.49 $3.49 49491
3/4 in. D Zinc-Plated Iron Straight Connector For Liquid Tight Each: $4.92 $4.92 45761
3/4 in. D Zinc-Plated Steel 90 Degree Elbow For EMT Each: $5.02 $5.02 02-55542PE
3/4 in. D Zinc-Plated Steel Conduit Coupling For Rigid/IMC Each: $2.20 $2.20 02-55081
3/4 in. NM Cable Cable Connector D Single: $0.35
Pack of 50: $16.50
$0.35
$0.33
49741
49741
3/4 in. NM/SE Clamp Connector D Pack of 50: $30.17 $0.60 C-750
3/4 in. Non-Metallic Cord Grip Connector D 49227M Each: $4.75 $4.75 49227M
3/4 in. Plastic Insulating Bushing Single: $0.30
Pack of 50: $13.50
$0.30
$0.27
49322
49322
3/4 in. Strain Relief Cord Grip Connector D Each: $2.82 $2.82 49214
3/4 in. Threaded Cable Connector D Each: $2.36 $2.36 49093
3/4 in. Zinc Insulated Grounding Bushing Pack of 10: $44.50 $4.45 49382
3/4 in. Zinc-Plated Iron 90 Degree Connector For Liquid Tight Each: $6.72 $6.72 45764
3/4 in. Zinc-Plated Steel 90 Degree Elbow For Rigid/IMC Each: $6.80 $6.80 02-55532PE
3/4 in. Zinc-Plated Steel Compression Connector For Rigid/IMC Each: $6.51 $6.51 49051
3/4 in. Zinc-Plated Steel Compression Coupling For Rigid/IMC Each: $8.43 $8.43 49061
3/4 in. Zinc-Plated Steel Threaded Nipple For Rigid/IMC Pack of 2: $4.55 $2.27 44361
1 in. 1-1/4 to D Zinc-Plated Steel Reducing Washer Pack of 2: $0.75 $0.38 49306
1 in. 2 to D Zinc-Plated Steel Reducing Washer For Rigid Pack of 100: $58.67 $0.59 49313
1 in. D Die-Cast Aluminum Conduit Body For Rigid 1 pk — Model Each: $9.76 $9.76 02-55643LB
1 in. D Die-Cast Aluminum Conduit Body For Rigid 1 pk — Model Each: $11.95 $11.95 02-55643T
1 in. D Die-Cast Aluminum Service Entrance Elbow For Rigid Each: $7.49 $7.49 02-51027
1 in. D Die-Cast Aluminum Service Entrance Head For NM/SE Each: $5.02 $5.02 02-51253
1 in. D Die-Cast Zinc 90 Degree Squeeze Connector For FMC/RWFMC Each: $6.14 $6.14 02-55807
1 in. D Die-Cast Zinc Compression Connector For EMT Single: $1.92
Pack of 10: $17.70
$1.92
$1.77
02-55252
02-55252
1 in. D Die-Cast Zinc Compression Coupling For AC, MC Each: $1.71 $1.71 02-55262
1 in. D Die-Cast Zinc Conduit Nipple For Rigid/IMC Single: $1.49
Pack of 10: $13.70
$1.49
$1.37
49204
49204
1 in. D Die-Cast Zinc Offset Nipple For Rigid/IMC Each: $2.69 $2.69 02-51522
1 in. D Die-Cast Zinc Rain-Tight Compression Connector For EMT Each: $1.52 $1.52 02-55852
1 in. D Die-Cast Zinc Screw-In Connector For FMC Each: $1.71 $1.71 02-56012
1 in. D Die-Cast Zinc Screw-In Coupling For FMC Each: $1.89 $1.89 02-56015
1 in. D Die-Cast Zinc Set Screw Connector For EMT Single: $0.75
Pack of 25: $17.25
$0.75
$0.69
02-55232
02-55232
1 in. D Die-Cast Zinc Set Screw Coupling For EMT Pack of 20: $17.99 $0.90 02-55242
1 in. D Die-Cast Zinc Squeeze Connector For BX, MC and FLEX 1 p Pack of 10: $23.60 $2.36 02-55410
1 in. Plastic 90 Degree Connector For Liquid Tight Each: $5.80 $5.80 02-55492
1 in. Plastic Straight Connector For Liquid Tight Each: $2.97 $2.97 02-55462
1 in. Service Entrance Cable Connector D Each: $3.85 $3.85 02-55760
1 in. Zinc Insulated Grounding Bushing Each: $5.16 $5.16 49383
1 in. Zinc-Plated Iron 90 Degree Connector For Liquid Tight 1 Each: $8.27 $8.27 45765
1 in. Zinc-Plated Iron Straight Connector For Liquid Tight 1 Each: $5.80 $5.80 45762
1 in. Zinc-Plated Steel 90 Degree Elbow For EMT Each: $6.22 $6.22 02-55543PE
1 in. Zinc-Plated Steel 90 Degree Elbow For Rigid/IMC Each: $9.75 $9.75 02-55533PE
1 in. Zinc-Plated Steel Conduit Coupling For Rigid/IMC Each: $3.10 $3.10 02-55082
2 in. 2-1/2 to D Steel Reducing Washer For Rigid/IMC Pack of 2: $1.74 $0.87 49421
2 in. D Die-Cast Aluminum Conduit Body For Rigid Each: $31.11 $31.11 02-55646LB
2 in. D Die-Cast Aluminum Service Entrance Elbow For Rigid/IMC Each: $32.67 $32.67 02-51030
2 in. D Die-Cast Aluminum Service Entrance Head For NM/SE Each: $12.91 $12.91 02-51256
2 in. D Die-Cast Zinc Compression Connector For EMT Each: $6.53 $6.53 02-55255
2 in. D Die-Cast Zinc Compression Coupling For EMT Each: $6.89 $6.89 02-55265
2 in. D Die-Cast Zinc Conduit Nipple For Rigid/IMC Each: $4.82 $4.82 49209
2 in. D Die-Cast Zinc Set Screw Connector For EMT Each: $3.77 $3.77 02-55235
2 in. D Die-Cast Zinc Set Screw Coupling For EMT Each: $3.01 $3.01 02-55245
2 in. Galvanized Steel 90 Degree Elbow For EMT Each: $15.52 $15.52 02-55546PE
2 in. NM/SE Clamp Connector D Each: $3.46 $3.46 44676
2 in. Service Entrance Cable Connector D Each: $10.17 $10.17 02-55794
2 in. Zinc Insulated Grounding Bushing Each: $7.03 $7.03 44386
3 in. D Die-Cast Aluminum Service Entrance Head For NM/SE Each: $60.27 $60.27 02-51258
3 in. D Zinc-Plated Steel Electrical Conduit Locknut Each: $2.45 $2.45 49108
3 in. Plastic Insulating Bushing Each: $1.43 $1.43 49328
30 in. Round Zinc-Plated Steel 0. H X 0.91 in. W Knockout Seal Each: $33.92 $33.92 52691
31 in. Round Zinc-Plated Steel 0. H X 1-1/2 in. W Knockout Seal Each: $1.01 $1.01 49154
31 in. Round Zinc-Plated Steel 0. H X 1.15 in. W Knockout Seal Each: $19.17 $19.17 52692
33 in. Round Zinc-Plated Steel 0. H X 2 in. W Knockout Seal Each: $1.24 $1.24 49155
34 in. Round Zinc-Plated Steel 0. H X 1 in. W Knockout Seal Single: $0.61
Pack of 25: $14.00
$0.61
$0.56
49152
49152
35 in. Round Zinc-Plated Steel 0. H X 1-1/4 in. W Knockout Seal Each: $0.75 $0.75 49153
see product New Work Round Die-Cast Zinc Box Spacer Gray Each: $1.45 $1.45 49208
see product New Work Round Die-Cast Zinc Box Spacer Gray Single: $1.11
Pack of 10: $10.30
$1.11
$1.03
49207
49207
see product Wedge Clamp Connector Each: $9.93 $9.93 51061

Prices as listed on supplytie.com on Nov 19, 2026; they can change (235 packs, 209 items). For mixed sizes or a full pallet, send your list for a free bulk price check.

How to choose

Pick by conduit or cable type first; a fitting made for one does not fit another.

  • EMT (thin-wall) uses compression or set-screw connectors and couplings. Compression and rain-tight versions are for damp or outdoor locations; check the listing on the product page.
  • Rigid and IMC are threaded conduit: threaded nipples, couplings, conduit bodies (LB, LL, LR, T) and bushings. Insulated bushings protect wire at the end of the run.
  • Flex and armored cable (AC, MC, FMC) use squeeze or screw-in flex connectors; liquid-tight flexible conduit needs liquid-tight connectors with a sealing gland.
  • NM/SE cable uses clamp connectors; service entrance heads and SE connectors finish an overhead service.
  • Size is the trade size of the conduit (1/2, 3/4, 1, 1-1/4 in. and up), not the measured diameter.
  • Ground clamps bond a ground wire to pipe or rod; some are rated for direct burial.

Follow the NEC and local code for where each fitting may be used.

Related: Lighting and electrical buying guide · Free bulk price check

Ships to the lower 48 states; most items ship in 1–3 business days and drop-ship items vary (Shipping & Returns). Business accounts: Net 30 and tax-exempt purchasing. Get a free bulk price check

FAQ

Which electrical conduit fittings cost the least per fitting?

As of Nov 19, 2026: 1/2 in. NM Cable Connector D at $0.15 per fitting; 1/2 in. 1 to D Zinc-Plated Steel Reducing Washer For Rigid/IMC at $0.26 per fitting; 1/2 in. NM/SE Clamp Connector D at $0.27 per fitting. Larger packs usually lower the price per fitting; every pack is in the table.

What is the difference between EMT and rigid conduit fittings?

EMT is thin-wall unthreaded tubing joined with compression or set-screw fittings. Rigid and IMC conduit are thicker and threaded, so they use threaded couplings, nipples and conduit bodies. Each title says which conduit the fitting is for.

What size fitting do I need for 1/2 in. conduit?

Use a fitting with the same trade size and conduit type, here 1/2 in. EMT, rigid or flex. Trade size is a nominal name, not the outside diameter.