Self-dumping hoppers: low profile vs standard, steel vs plastic
Self-dumping hoppers collect scrap, chips and parts, then a forklift carries them to the dumpster and tips them out. Here's how the styles compare.
How does a self-dumping hopper work?
A forklift lifts the hopper by its fork pockets. On a bumper-release hopper, the hopper tips and dumps when its bumper contacts the dumpster, then returns to an upright, locked position. Many models also have a pull cable so the driver can release it from the forklift seat. See bumper release steel hoppers.
Low profile or standard height?
A low-profile hopper has a lower body, which helps where it has to fit under a machine outfeed or a work table, or where parts are loaded by hand. Low-profile choices here:
- Low profile 90 degree self-dumping steel hoppers: 22 models, 2,000 to 6,000 lb capacity by model
- Low profile D-style self-dumping hoppers: 3 models, 2,000 lb, 12 gauge steel
- Low profile parts hoppers
Steel or plastic?
Steel hoppers are the choice for heavy scrap, chips and sharp parts. Bayhead self-dumping hoppers have a molded polyethylene body in a welded steel frame: lighter and quieter, and the body won't rust, dent or absorb liquids. They come in 4 body sizes from 5/8 to 2.2 cubic yards.
What sizes and capacities are there?
- Jesco H211 self-dumping hoppers: 0.25 to 1.5 cu. yd., 4,000 to 6,000 lb, stackable
- Jesco large volume hoppers: 3, 4 and 5 cu. yd.
- Vestil bumper release steel hoppers: 8 models, 2,000 to 6,000 lb
- Vestil drop bottom hopper: 1 cu. yd., 3,000 lb, empties through the bottom
- Vestil portable steel hoppers: on casters, 2,000 lb
Each product page lists the fork pocket size; check it against your forklift's forks.
Can I add lids or casters?
Yes: lids for steel hoppers, caster sets for steel hoppers, Jesco hopper lids, Jesco caster options and Bayhead hinged lids. Match the lid or caster set to the hopper model.