VELCRO® Extreme Outdoor 4in x 1in Strips Titanium 10 ct - 4" Length x 1" Width - Titanium - Polyester - 10 / Pack

General Information

---

Manufacturer:Velcro Companies
Manufacturer Part Number:90812
Brand Name:VELCRO®
Product Line:Extreme
Product Name:Extreme Outdoor 4in x 1in Strips Titanium 10 ct
Marketing Information:Adhesive sticks to most rough surfaces such as brick, wood, concrete and more and requires time for adhesive to set before mating the hook and loop so you have time to reposition. Adhesive is also water-resistant. Extreme tape is designed for permanently placing items.

Packaged Quantity:10 / Pack
Product Type:Hook & Loop Fastener

Product Information

---

Tape Width:1"
Tape Length:4"
Strength Type:

• Adhesive
• Industrial Grade
• Holding

Tape Strength:15lb
Application/Usage:

• Brick
• Wood
• Concrete
• Outdoor
• Rough Surface
• Tools
• Hanging
• Storing
• Mounting
• Indoor
• Wall
• Home
• Office
• Garage
• Car
• Basement

Quantity Per Container:Strip
Features:

• Heavy Duty
• Strong
• Peel & Stick

Reliability

---

Durability:

• Water Resistant
• UV Resistant
• Weather Resistant

Physical Characteristics

---

Color Family:Gray
Product Color:Titanium
Product Material:Polyester

Miscellaneous

---

Additional Information:Shape:

Strips

Care and Application:

Instructions:

• Clean and dry surface before application
• Peel tape from fastener and press firmly into place
• Adhesive reaches maximum strength after 24 hours

Note: Recommended for temperatures between 0°F to 140°F. Not recommended for fabrics, dashboards, flexible vinyl or underwater use. Continued exposure to full sunlight can damage fastener. May not adhere well to certain types of brick - testing is recommended.

Removal Instructions:

• Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
• Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
• Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
• Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
• Stick the ball on the adhesive which is on your substrate and pull it off
• Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
• If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners

Weight Rating:

1 lbs per square inch up to 15 lbs

Functional Temperature Range:

0-140° F (-18-60° C)

Recycled:No
Assembly Required:No
Country of Origin:Mexico